[cslater]

Hey what type of barrel are all you guys using on your Phantoms at TNT? I put the smallest detente in but every ball would still roll out. Any suggestions on what you guys are using?

Thanks,
Chris

[longstar550]

Hey what type of barrel are all you guys using on your Phantoms at TNT? I put the smallest detente in but every ball would still roll out. Any suggestions on what you guys are using?

Thanks,
Chris

I use the silver detent or if that isn't small engough good old tape mod but if u don't want the tape mod get ur barrel bored for freak inserts

[Cheap-o]

I used a front frame screw that was about 1 thread and a half too long so it stuck into the breach. it held every ball perfectly and it would not budge even if you shook the crap outta it.

[Maximus Prime]

Order a .682 and a .685 J&J barrel back and a desired tip of your choice.

[Symbiotic1]

.681 on a Carbon fibre CCm kit. Never have a roll out and they only break when they're hittin' you!

[cslater]

Thanks for the replies guys. Anyone know where to either get CCM or J&J barrels on the Island?

Thanks,
Chris

.681 on a Carbon fibre CCm kit. Never have a roll out and they only break when they're hittin' you!

[longstar550]

thee both pretty uncommon barrels you might have to order them in, otehr than ordering them in i think your best bet would be trying to find one used

[ShadoWalker]

Thanks for the replies guys. Anyone know where to either get CCM or J&J barrels on the Island?

Thanks,
Chris

.681 on a Carbon fibre CCm kit. Never have a roll out and they only break when they're hittin' you!

I know that Bastion used to carry the J&J Edge kits Phantom Threaded, Drop them a note and see if they still have any...

Also check with Harrisons & PW Paintball. I believe someone mentioned that Harrisons carries J&J barrels for the Tippmann and I thought I saw a J&J kit on the wall in PW's shop. If you get lucky they might have just what you're looking for already in stock, more likely they won't but if they carry J&J products you might be able to convince them to get the Edge Kit you want in for you.

Central Island paintball in Nanaimo probably doesn't have the Phantom threaded Edge Kit in as they're still building up their stock but I'd put money on Tom being willing to special order one in for you if his distrubutors carry them!

SW

[Symbiotic1]

I don't think they make ccm carbons any more but I'm sure you can aquire one through one website or another. Maybe Rising sun paintball still has some Python kits for sale. My bro use one and loves it. GL

[cslater]

I will email those guys and see. Thanks.

[Cheap-o]

They dont make CCM Carbon kits anymore but you can get an aluminum barrel from them:

full kit: http://cgi.ebay.com/Barrel-Kit-CCM-New-Pha...da#ht_500wt_928

Phantom sizers: http://stores.ebay.com/ccmfactorydirect_Ph...634Q2ec0Q2em322

If you ask nicely they will make you 679, 677 and 675 sizers for your phantom as well.

[Sniper Part2]

You can get your barrel machined out to take freak inserts. It work great

Sniper Part2