[Ashton]

I bought a 2k5 from PW paintball a few weeks ago but I cant reprogram it I printed off instructions for the WAS equillizer board inside it and followed them exactly but it still won't work.

[Devon-M]

Is the tournament lock on?

[Timbits]

Umm, if you can't figure it out before pw is open, just go in and talk to paul. I bet he knows.

[5MinuteMajor]

Paul will deffinatly know.
If reading the manual didn't enable you to 'fix' it.
I doubt reading anything here is going to solve your problem.

You are best off putting it in the hands of someone who knows Timmys.
I have found several times that replacing the 9v with a NEW and GOOD battery solves a lot of the problems first time Timmy owners have. WAS boards need a good voltage in them - if I recall a min of 8.6v or something like that to function.

But ya go see Paul for a quick fix. I'm sure it's probly something simple you are missing.

[Ashton]

how would I turn the lock off?

[Devon-M]

Hmmm, I dunno much about timmy's, but most markers have a lil button inside the grip.

This post has been edited by Devon-M: 13 September 2007 - 02:35 PM

[timberlake]

Hmmm, I much about timmy's, but most markers have a lil button inside the grip.

??? i much about timmys just givvin er eh devon i think its time to ease of the booze your too young to drink!!!

[Devon-M]

Hmmm, I dunno much about timmy's, but most markers have a lil button inside the grip.

There^^^^^^ Typo...

[5MinuteMajor]

12 days after the original post.....have you taken it in so Paul can look at it yet? Or are you really hoping to read a solid solution that you can simply understand from all us forum goons still?

What was it?

I'll guess that it's fixed now.

[wighty20]

Save yourself the hassle man... Tadao all the way

[Devon-M]

Save yourself the hassle man... Tadao all the way

Agreed.

Tadao ftw

[Ashton]

paul told me to replace the battery but I also found that the tournament lock is turned off by ground the two center prongs in the datalink connector, then I was able to program it but the eye logic doesn't make sense i put it on forced mode but when there is a ball in place while I pull the trigger the led flashes red/green and after three shots it automaticly goes into bypassed mode, and the eyes shut off, and i was wondering if this is the result of a faulty board, because all the other boards i've shot with will shoot if the is a ball and wont if there isn't.

This post has been edited by Ashton: 04 December 2007 - 12:46 PM

[5MinuteMajor]

It took you two months to get to this point?

[Ashton]

It took you two months to get to this point?

no actually it took me two months to get around to posting an update.
but I will be more actively involved in the forum now that I am on the computer more often.
I just need to get back on the tournament scene.

[stress69]

ashton,u can download the manual from was website..it'll explain the default and such..ur board is fine,u just don't know what it does.......anywayz,go 2 their website..all the info is there...as i told u abouit the board,but obviously u don't remember what i said....

[Ashton]

Actually I would like to post an update.
everytime I have paint and air in the gun it works perfectly.
a couple days ago I shot a case of paint off and only had one choped shot and 3 barrel breaks.
so I think the gun is going to work well for now, but i still plan on upgrading the board.